Softened water equipment can be divided into a variety of models, such as single tank time type, single tank flow type, double tank flow type, etc., and the double tank flow type can be divided into one use, one standby type and simultaneous operation, respectively, to meet the different water needs of users. This article will introduce the various models of softened water equipment.
Various models of softening water equipment:
1, single tank time type: microcomputer time control, the equipment runs to the set time automatically into the regeneration state, can be regenerated once a day or several days.
2, single tank flow type: using turbine flow control or electronic flow sensor control, when the equipment water production reaches the pre-set flow automatically into the regeneration state, can be regenerated many times a day.
3, one with one standby type: one tank runs another standby, when the first running tank water reaches the set flow rate into the regeneration stage, at the same time, another tank into the working state, so that the two tanks alternately work regeneration, can be 24 hours of continuous water supply.
4, run at the same time, respectively regeneration type: two tanks run at the same time, after reaching the flow rate, one first regeneration and another continue to water, the first regeneration after the completion of the working state, the other into the regeneration state, the two tanks after the completion of regeneration and into the simultaneous working state.
The above is the introduction of various models of softened water equipment, in general, these models of softened water equipment can be divided into two categories of flow type and time type, which is the same in function, but there are differences in the form of triggering regenerative signals, their difference is reflected in the control system, the inlet and outlet with impeller components is flow type softened water equipment.
